It sounds like you’re looking for a video related to greasing a Simo high voltage motor. I don’t have video content, but I can suggest steps or guidelines on how to properly grease a high voltage motor if that helps!
Here’s a general overview of what you’d typically do:
1. Ensure Safety:
– Make sure the motor is turned off and completely disconnected from the power source.
– Wear appropriate personal protective equipment (PPE) like gloves and safety goggles.
2. Check Manufacturer’s Instructions:
– Always refer to the manufacturer’s manual for specific instructions on grease type and application.
3. Clean the Motor:
– Clean the motor surfaces to remove any dust, debris, or old grease before applying fresh grease.
Green energy motors
4. Locate the Grease Nipples:
– Find the grease nipples or grease ports on the motor. These are typically located on the bearings.
5. Use the Correct Grease:
– Ensure you’re using the proper grease recommended by Simo or the motor’s manufacturer, typically high-quality lithium or synthetic grease.
6. Grease Application:
– Use a grease gun to apply the grease slowly to avoid over-greasing, which can cause damage. Apply until you see grease oozing from the bearing seals, indicating the bearings are properly lubricated.
7Variable frequency motor. Clean Up and Inspect:
– After greasing, wipe off any excess grease and inspect for leaks or any potential issues.
If you’re looking for a specific video, you might want to check platforms like YouTube or manufacturer websites for demonstration videos.
关注微信公众号
