The parameters of Simo High Voltage Motors generally include a range of specifications, including electrical, mechanical, and performance data. Here’s an overview of typical parameters you might find for high voltage motors like those produced by Simo (or similar manufacturers):
1. Power Rating
– Typically measured in kW (kilowatts) or HP (horsepower).
– Common power ratings can range from 500 kW to several megawatts.
2. Voltage Rating
– High voltage motors are usually designed for voltages ranging from 3.3 kV to 15 kV, but some specialized models may go even higher.
3. Frequency
– The standard frequency is typically 50 Hz or 60 Hz, depending on the region (Europe usually uses 50 Hz, while North America typically uses 60 Hz).
4. Speed
– The synchronous speed of the motor can vary depending on the number of poles.
– Standard speeds might be 3000 RPM, 1500 RPM, or 1000 RPM at 50 Hz, and 3600 RPM, 1800 RPM, or 1200 RPM at 60 Hz.
– The motor may have a variable speed option in some cases, depending on the drive system.
5. Efficiency
– High voltage motors are typically designed for high efficiency, ranging from 92% to 98%, depending on the design and load.
6. Service Factor
– The service factor (SF) is often 1.0 or 1.15. A higher service factor means the motor can handle temporary overloads without damage.
7. Insulation Class
– Common insulation classes include F or H, with Class H (180°C) providing higher temperature tolerance.
8. Starting Type
– High voltage motors can be started in several ways, including or auto-transformer, depending on the motor’s size and application.
9. Frame Size
– The frame size will be a standardized number, usually indicated by a code that corresponds to specific physical dimensions of the motor.
10. Protection Type
– High voltage motors often come with various protection types such as IP55 (dustproof and water-resistant) or IP66 for more rugged environments.
11. Bearing Type
– Bearings are often designed for high loads and can be ball bearings or roller bearings, depending on the design and application.
12. Cooling Type
– The cooling method could be IC01 (air-cooled), IC61 (forced air), or IC81W (water-cooled) for larger models.
13Electric motor engineering. Ambient Temperature
– The standard ambient temperature for high voltage motors is usually 40°C, but special designs can operate in different temperature ranges.
14. Application Areas
– High voltage motors like those from Simo are typically used in industrial applications such as pumps, compressors, fans, and mills, where high power and efficiency are needed.
If you have specific Simo High Voltage Motor models in mind, I could try to get more detailed technical specs for those.
关注微信公众号
